IECEx Certificate TWIG One Ex

Canal público / Certificates

3695 vistas
0 Gustos
0 0

Compartir en redes sociales

Compartir enlace

Use permanent link to share in social media

Compartir con un amigo

Por favor iniciar sesión para enviar esto document ¡por correo!

Incrustar en su sitio web

Seleccionar página de inicio

1. IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification System for Explosive Atmospheres for rules and details of the IECEx Scheme visit Certificate No.: IECEx EESF 19.0020X Status: Current Date of Issue: 2020-06-26 Applicant: Twig Com Oy Lairolantie 14, FI-24910 Salo Finland Equipment: GPS/GSM Personal Protection and Surveillance Devices TWIG One Ex TLP50EU and TWIG One Ex TLP51EU Optional accessory: TWIG USB cable FME92EU; TWIG battery charger CME92EU; TWIG Leather pouch cases YN3310EX, YN3500EX and YN5000EX; TWIG Belt clip MC3750/AFB Type of Protection: Intrinsically safe Marking: Page 1 of 3 Issue No: 0 Certificate history: Ex ib IIC T4 Gb Ex ib IIIC T130°C Db Ta: -20 °C...+60 °C 1. 2. 3. Approved for issue on behalf of the IECEx Certification Body: Position: Signature: (for printed version) Date: This certificate and schedule may only be reproduced in full. This certificate is not transferable and remains the property of the issuing body. The Status and authenticity of this certificate may be verified by visiting or use of this QR Code. Certificate issued by: Eurofins Expert Services Oy Kivimiehentie 4 FI-02150 Espoo Finland Jenni Hirvelä Senior Expert 2020-06-26

3. IECEx Certificate of Conformity Certificate No.: IECEx EESF 19.0020X Date of issue: 2020-06-26 Page 3 of 3 Issue No: 0 EQUIPMENT: Equipment and systems covered by this Certificate are as follows: SPECIFIC CONDITIONS OF USE: YES as shown below: TWIG One Ex TLP50EU and TWIG One Ex TLP51EU devices are Lithium-Ion-polymer battery operated Cellular Lone Worker Safety devices with GNSS and hybrid radio network positioning. They use MPTP telematics protocol for tracking the device and reporting alarms etc. Telematics message can be automatic man down signal, location update or manual by pressing the panic button. Device position is retrieved from inbuilt GNSS module or various radio networks with server application. Emergency calls use Cellular networks. The device is meant to be used mainly for safety communication and tracking purposes in case of accident in potentially explosive areas. The battery pack inside the equipment is not user replaceable. The battery pack has a special safety circuit. Safety circuit is used to limit the current or to provide fast cut-off of supply voltage in case of electronics or segregation failure. The enclosure is static dissipative plastic. Maximum radio frequency power is limited to 2 W (33 dBm). TWIG One Ex TLP50EU is a device type number for the 2G, 3G and 4G gsm devices and TWIG One Ex TLP51EU for PLS8 gsm device. 1. 2. 3. Connection to the charger input is only allowed with TWIG USB cable or TWIG battery charger. The device shall not be recharged or programmed inside hazardous area. SIM card shall not be changed inside hazardous area.

2. IECEx Certificate of Conformity Certificate No.: IECEx EESF 19.0020X Date of issue: 2020-06-26 Page 2 of 3 Issue No: 0 Manufacturer: Twig Com Oy Lairolantie 14, FI-24910 Salo Finland Additional manufacturing locations: This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended STANDARDS : The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards IEC 60079-0:2017 Edition:7.0 Explosive atmospheres - Part 0: Equipment - General requirements IEC 60079-11:2011 Edition:6.0 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" This Certificate does not indicate compliance with safety and performance requirements other than those expressly included in the Standards listed above. TEST & ASSESSMENT REPORTS: A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in: Test Report : Quality Assessment Report : FI/EESF/ExTR20.0020/00 FI/EESF/QAR19.0012/00


  • 3695 Vistas totales
  • 3108 Vistas del sitio web
  • 587 Embedded Views


  • 0 Social Shares
  • 0 Me gusta
  • 0 No me gusta
  • 0 Comentarios

Veces compartido

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Incrusta 2

  • 2
  • 1